Julabo FD200 Flow-Through Cooler User Manual

19514616-V2.doc 26.07.2013 English Operating manual Immersion Coolers FT200 FT400 FT900 Flow-Through Cooler FD200 FT900

Operating instructions 10 Operating instructions 3. OPERATING CONTROLS AND FUNCTIONAL ELEMENTS FT400 FT200 FT 400132 FT 400132 Rear view 10AMP10

11 FT900 FT90012378 Rear view 11

Safety notes for the user 12 4. Safety notes for the user 4.1. Explanation of safety notes In addition to the safety warnings listed above, warnin

13 4.3. Safety instructions Follow the safety instructions to avoid personal injury and property damage. Also, the valid safety instructions for wo

Preparations 14 5. Preparations 5.1. Installation  Place the unit on an even surface on a pad made of non-flammable material.  Press down th

15 Accessory: Clamp for cooler probe FT200/400 - order no. 8 970 400 5.3. Tube connection FD200  Connect the tubes and secure with tube clamps

19514616-V2.doc 26.07.2013 6.2. Switching On  The immersion cooler is turned on and off with the mains switch. (1). The control light in the swi

17 7. TROUBLESHOOTING  Malfunction of compressor: The cooling compressor is equipped with an overload protection device that will be triggered by

Cleaning / repairing the unit 18 FT900  The ventilation grid (7) is detached by unscrewing the four mouting screws (FT900).  Clean the ribbed con

19

2 Congratulations! You have made an excellent choice. JULABO thanks you for the trust you have placed in us. This operating manual has been designe

Cleaning / repairing the unit 20

3 TABLE OF CONTENTS OPERATING MANUAL ... 4 1. INTENDE

Operating manual 4 Operating manual 1. Intended use JULABO immersion coolers have been designed for temperature application to specific fluids in a b

5 If you have any questions concerning the operation of your unit or the information in this manual, please contact us! Contact JULABO GmbH Eisenba

Operator responsibility – Safety instructions 6 When using hazardous materials or materials that could become hazardous, the operator must affix the

7 2.2. EC Conformity The products described in the operating instructions conform to the requirements of the following European guidelines: Directi

Operator responsibility – Safety instructions 8 2.4. Technical specifications FT200 FD200 Temperature range °C -20 … +30 10 … +30 Cooling capa

9 Environmental conditions according to IEC 61 010-1: Use indoors only. Altitude up to 2000 m - normal zero. Ambient temperature: see Technica